Guide :Freezers : Freezers

Chest freezer The plug like thing that plugs into the motoer burned out. where to get one and cost

Posted by njthompson on Oct 22, 2007

Research, Knowledge and Information :

Full text of "Absolute Magnitude n08 (1997 Fall Winter)"

Full text of "Absolute Magnitude n08 (1997 Fall Winter)" See other formats ...
Read More At :

Welcome to Steven's Blog! -

Why is direct current so screen cleanrr it tends to flow out of solution as ... does using better spark plugs detctor handheld metal ... is burned hydrogen, and the ...
Read More At :

Full text of "Virginia Beach sun" - Internet Archive

Full text of "Virginia Beach sun" See other formats ...
Read More At :

Suggested Questions And Answer :

Chest freezer The plug like thing that plugs into the motoer burned out. where to get one and cost

Service: DIY repear and diagnosic help:
Read More At : Freezers...

Freezer Burn I can not put meat in the freezer with regular freezer bags it starts getting freezer burn from the beginning so I invested in a food saver (as they suggested) the meat doesn't get freezer burn but it does change color (brownish) I have noticed that when I check on the meat 24 hours later there are parts of it that have not froze solid (it takes about 48 hours) My icecream is always soft. I keep the freezer on minus -10. I have had 2 different repair companys and one Sears repair man to check my freezer and everyone says there is nothing wrong with it and that I'm not packing my meat correctly..they say that no air is getting inside and temp. is correct. I have been a housewife for 45 years and have had about 3 freezers in my lifetime and I never had this problem. They told me that you have to use a vacuum sealer although I have not needed to ever before. My thoughts are it may be defrosting and re freezing when I'm not aware since it is in my basement away from my everyday living space. What do you think can be wrong that I can ask a repair man to check.

It sounds like you may be overloading your unit. If you place a large quanity of non frozen items in the freezer at one time, it may take a few hours to bring the temperature back down. This usually happens with a chest type not an upright. Insure when adding items to the freezer there is room for air movement. With out looking at it I think the problem is the defrost timer or sensor. Maybe staying on too long increasing the overall temperature of the unit. When ever the defrost cycle is on, the cooling unit is also off. As far as the meat freezer burning, none of the freezer bags I have used prevent this. I pr-wrap my meat in freezer paper and then place it in a bag, sometimes freezer bags sometimes not. I try not to buy meat from grocery stores, I grow my own meat and have it butchered and vacuum packed, it doesn't change color. Please note that items in a freezer bag moved around after the contents have frozen will cause air leaks in the bags very easily.
Read More At : Freezer 20.3 cu. ft. Frost Free Upright Freezer...

Need help w/the coldness of our upright

It sounds like a freon leak. This can happen when moving it. I don't recomment fixing it. You can get it charged again and it will work for a while. This will cost you about $75 - $100. You can't do this yourself as you have to be certified to buy freon. The reason I don't recomment fixing it is because when it goes out again you will lose all food. Since it is a freezer you probably don't open it every day and you might not notice that anything is wrong. Try to lay a guilt trip on the seller and see if they will take it back.
Read More At : 16.7 cu. ft. / 473 liter Upright Freezer FUF17DMRWH...

My brand new freezer wont freeze

I would plug it into a different plug in - not one that is on the same circuit that it is plugged into now. If the plug in is working for other things, it still may be bad and not able to handle the load of the freezer. If your freezer will not work on a completely different circuit, then there could be something wrong with the freezer, but it is not likely since two of them should not be bad. Seems to me more like an electrical problem in your location. Hope this helps you, Rick
Read More At : Freezer  14.8 Cu. Ft. Manual Defrost Chest Freezer...

Hotpoint delivered an expensive Stainless Steel fridge freezer on Feb 1st and damaged my kitchen flooring in several places, which prior to this was in pristine condition. Also the appliance was found to be badly damaged on both doors when unpacked.Hotpoint suggested replacing doors and a week later they sent someone who also saw the state of the damaged flooring and he immediately ordered a replacement appliance for delivery the following week. During this replacement delivery they further damaged my flooring and had to tear a large amount of the worst damaged area to allow the appliance to be stable as it has made a piled mess underneath it! They also grazed the side of the 2nd appliance which now shows as white, which I decided not to complain about with the stress of everything else. Indesit complaints department asked for 2 estimates for replacement, and a receipt for flooring which I no longer have. I phoned and explained that, also pointing out that torn and damaged vinyl flooring cannot be repaired, and was told that would be fine and of course they wouldn't expect the flooring to be repaired. I sent the estimates with a covering letter giving all the relevant information and explaining that I had been unable to find anything like the flooring I have in colour and design which was disappointing, although the one I have settled with is cheaper than mine I was happy to order that and get it settled. They have sent the estimates back to me asking for a letter from each company stating that the flooring cannot be repaired, and the replacement is of equivalent value, also asking for a receipt for the flooring or I need to give the age of the flooring so that they can determine the amount they can pay TOWARDS the cost of supplying & fitting it! I live alone, have no animals and so the flooring bought to match my new kitchen which cost me £300 was in pristine condition,(I offered to send photos including the damaged half and the perfect half and they declined my offer twice)I had no intentions of buying new flooring, I don't need it, and with the high price I paid for the appliance they delivered to me I certainly couldn't afford it if I did! Now it would seem that I will have to pay something towards this and I feel this is totally wrong. It has taken me time to get my kitchen just right, this appliance was to be my last large purchase to bring it all together. I am naturally devastated. Can they make me pay some of the costs?

Ok, since you have no proof the company does not need to pay for the floor damage. Suggestion: Buy the new flooring out of your own pocket. And if you really want to try and get money for the repairs from the people who moved the appliance in, take them to civil claims court (United States)
Read More At : Freezer 22 Qt. Fridge/Freezer...

I bought a used avanti freezer model # cf2010 and it didnt come with a drain plug. Where can I get one?

Most appliance stores can order you one , if you have your model # and serial number,, or you can do a search on
Read More At : Avanti...

Ok we have a kenmore upright freezer Model # 253.26062103. We got it brand new about 3-4 years ago. It was working fine til about 2 weeks ago when the ice cream became soft and high temp alarm started going off..everything else stayed frozen. my husband checked and there was frost build up on the back wall which we decided to take evrything out of the freezer and self defrost it because we thought since the outside temp was unusually high maybe the freezer wasnt able to defrost properly. We did this and plugged it back in a few days later. We put a thermometer inside the freezer and it is only reading 20 degrees F or -5 celcius. Still not cold enough. We then replaced the electronic control panel which also houses the defrost timer and that did not help raise the temp. Alarm still going off when switched is turned on. We then decided to have a repair service out...they said it was the defrost heater, timer and thermostat, we said we already replaced the timer, so we bought the other 2 parts and replaced them. well it is still not cooling properly and we have no idea what to check next...This is costing us a ridiculous amount of money and we can't get a solution...Any help would be appreciated.

I had the same problem and it turned out to be the sensor, a $15 part. it pretty much controls everything related to defrosting.
Read More At : 20.3 cu. ft. / 575 liter Upright Freezer 23024...

1991 Kenmore 16 model 253 in storage for 7 years. Plugged it in and turned it nn last night and seemd to run fine, nice and quiet just like before. Today it is not cold and the comressor seems to be r

If the freezer was stored and not running for 7 years it may have lost coolant.  Since the compressor is running recharging the coolant may fix the problem.  Hot compressor might indicate low coolant since its motor is immersed in it.
Read More At : 19.7 cu. ft. / 558 liter Chest Freezer 13009...

Old hotpoint upright freezer only has 1 temp artic blast....

I would replace the thermostat because is the only thing that controls the temp. , also there's a timer and a terminator but them are only for defrosting the unit.
Read More At : 16.7 cu. ft. / 473 liter Upright Freezer FUF17DMRWH...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1166 seconds