Guide :Freezers : Commercial Freezer KM-500MAH

Hoshizaki Ice Machine starting problem after shut off

After noticing ice forming around the water lines inside the front panel, I decided to turn it off to defrost. When I tried to turn it back on it would not start again.Any ideas?

Research, Knowledge and Information :


Hoshizaki


• Complete and detailed explanation of the problem. 3 ... with any cuber or flaker other than a Hoshizaki Modular Crescent Ice Cuber. 2. ... Shut off the icemaker.
Read More At : www.hoshizaki.com...

Things to check before making commercial ice machine service call


Before making a service call ... We’ve also had customers turn off their ice machine to ... especially when we can determine the problem isn’t the ice machine.
Read More At : www.easyice.com...

AM SERVICE TRAINING - Hoshizaki America, Inc.


AM SERVICE TRAINING ... The Hoshizaki AM series ice machine uses a ... and should shut down the unit within 10 seconds after ice contacts the bulb.
Read More At : plus.hoshizakiamerica.com...

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-280MAF KM-280MWF


• Complete and detailed explanation of the problem HOSHIZAKI provides this manual ... water fill cycle before starting the ice ... is shut off, the unit is ...
Read More At : www.hoshizaki.com...

Practical Ice Maker Troubleshooting Tips


The service manual provides crucial information about the ice machine refrigeration ... Home » Practical Ice Maker ... and Hoshizaki service information ...
Read More At : www.achrnews.com...

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAF KM-500MWF KM ...


• Complete and detailed explanation of the problem HOSHIZAKI provides this manual ... water fill cycle before starting the ice ... is shut off, the unit is ...
Read More At : download.partstown.com...

Practical ice maker troubleshooting tips that might save you ...


A few minutes after starting the ... where the machine makes ice, but it won't drop off the ... Hoshizaki ice maker troubleshooting call you don't have ...
Read More At : www.air-conditioning-and-refrigeration-guide.com...

KM-280M H serv new - Restaurant Parts & More


• Complete and detailed explanation of the problem HOSHIZAKI provides this manual ... water fill cycle before starting the ice ... is shut off, the unit is ...
Read More At : www.rpm4parts.com...

The Ice Machine and Refrigeration Repair Blog - Real World ...


Watched a second batch of ice and tested bin thermostat to be sure unit shut off. ... Hoshizaki Ice Machine ... 2017 The Ice Machine and Refrigeration Repair ...
Read More At : www.icemachine-repair.com...

Troubleshooting tips for a couple of ice machines - YouTube


Jun 18, 2009 · The next video is starting stop. Loading ... Find out why Close. Troubleshooting tips for a couple of ice machines ... Hoshizaki KM Series Ice Machine ...

Suggested Questions And Answer :


Hoshizaki Ice Machine starting problem after shut off


I am guessing there is a safety switch somewhere which is gauging how much water is left in a defrost tray. Other likely things: open circuit breaker from the water shorting things out. Start with these. Other, more exotic things could be involved...but not as likely as the above.
Read More At : Commercial Freezer KM-500MAH...

Hoshizaki KM-500MAH is making sliver/chip ice. I


Just to let you know you need to use nickel safe ice machine cleaner. and i hate to tell you this but if you are seeing silver chips in your ice your evaporator is shot. even if it is under warranty they will not give a new plate just for the reason of not using nickel safe cleaner. hope this helps you. i have seen this many times as im a service tech. alot of restaurant owners use coffee cleaner and also destroy their plates
Read More At : Freezer Commercial Ice Machines - KM900MRH Commercial Ice......

DOES NOT MAKE ICE AND RED TROUBLE LIGHT COMES ON


Well if the repair man wasnt willing or able to reprogram it might be in your best intrest to replace the unit. nothing says you have to get new though. if you do a little searching you should be abelto find some great deals. if you need some help shoot me an e-mail on here
Read More At : Freezer Commercial Ice Machines - KM900MRH Commercial Ice......

Have a Hoshizaki Commerial Ice Maker KM-630MRB that quits working when the temperature outside gets below 32 degrees. It starts to beep 3 times and we have to shut it off and reset it when it warms u


Well aside from jacking the machine up and putting another in its place, the only thing left is the electronic thermometer/thermostat that should be sensing the ice and not the outside temperature. By the way, if you spend more than the machine is worth think about another one.
Read More At : Freezer Commercial Ice Machines - KM900MRH Commercial Ice......

I got a commercial frontload coin op washer for dirt cheap sold as scrap, but brand new. There was a manilla envelope without any paper work taped to the inside of the machine. The number on this envelope is 134992500, is this the model number? The guy gave me large size brain board with it from anothe same model and told me there was something wrong with it and to change this circuit board. I ran the machine with the old parts first. The machine seemed to go through all the cycles and even went into high speed spin. I ran the first run with the back of the machine off. I had to unplug the machine 2 times real quick because the water pump was froze and needed to thaw more. No problem, the water pump spit out ice a half hour later and when I plugged it in the machine kept going through the cycles. The machine went into high spin and ran like a top. I put the back on the machine and ran it again. This time all it would do is a slow back and forth tumble all the way until the machine kicked off and finshed its full cycle. I than put the spare mother board or brain whatever the large ciruite board is called in the bottom back left corner, plugged it in and it ran through the cylcles and did the same exact thing. It would not kick into high spin at all. just a slow tumble back and forth. So now I figure its not the main circuite board I guess I should put the original board back in the machine. One more thing. when I ran the machine again I thought maby the timming was off between the coin timmer and the timmer in the front of the machine that customers can see. Is this timming thing even possible or will the machine correct its self automatically? Where should the plastic wheel start at, in the coin box timmer, so I can get it at a new start up?


The problem was never solved. I never got to chat with anyone about anything at all, and I dont have a ******* freezer. If I was able to chat with someone I would have been able to get the proper model number from my washing machine. Cancel my subscription and I want a refund in full. Dont send me any more emails, unless it confirms my subscription is canceled. I will not use your service. Your website is to complicated and is designed to rip people off.
Read More At : 17.8 cu. ft. / 504 liter Commercial Freezer FFC18K1CW...

Ice cube cycle time very high


I suspect a defective liquid line or pump down seleonid coil. just make sure you hear the "click" when it starts up if not the selenoid coils could be defective. also verify that the condenser fan is running,because if not you are short-cycling on high head pressure. please contact if you need any additional info
Read More At : Commercial Freezer KM-500MAH...

Ev201nxm door doesn't seal/ices up


I have a EVL201NXRQ05 upright whirlpool. It was purchased in Nov 2008 in the Summer of 2009 the gasket was leaking at the top of the door. The gasket on this door snaps into place (no hardware needed). The problem is the door was bowed in the middle pulling the gasket down and away from the metal frame of the freezer - to the point the magnets in the gasket would not touch in the middle of the opening. I requested a new door while under warrantry. The door did not appear to be repairable it is a glued/foamed-inplace assembly. The new door looked straight when I installed it last summer and now it is bowed but not yet leaking. Whirlpool has a design / manufacture problem with this door design. I have received an extended warranty option from Whirlpool this past week 4 months after the factory warranty has expired. I suspect they know they have any issue, but not much is written about it. I may end up buying the extended warranty, but first I'm going to where I bought it to complain.
Read More At : 19.6 cu. ft. Commercial Freezer EV201NXM...

Km500mae never shuts off


This is easy to fix first you need some food grade hose next put this hose in the bottom of your ice bin then run you water through this hose to the machine fit as much hose as you can in the bin floor and start the machine at night and the other thing you may wish to do is get a remote condenser
Read More At : Freezer Commercial Ice Machines - KM900MRH Commercial Ice......

My hoshizaki ice machine KM-900mrf model beeps 3 times and stop making ice. After reset it starts, but stats beeping again after an hour.


You need a manual to study. Download it for free. Hoshizaki makes quality ice. Other machines make just ice, quicker.
Read More At : Freezer Commercial Ice Machines - KM900MRH Commercial Ice......

Hi, i bught used hoshizaki model#km-z55bah ice machine, i came home and hooked it up. there was only the water line hook up the electrical cord to hook up. but i go to turn it on and it doesn't start,there is a reset button after i press it it runs for about 3 or 4 seconds and shuts off. if i set the swith to wash it starts the washing cycle. is there something else i need to do to make it work? i would really appreciate any help with this matter, thank you very much.


It sounds like the compressor motor is bad which is why it isn't running. When the compressor starts there is too much pressure and the safety to prevent damage is kicking in to stop it from damaging the unit any further. The reason it will start the wash cycle is because the typically doesn't involve the compressor cooling the unit.
Read More At : Commercial Freezer KM-500MAH...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.glacierfreezer.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1065 seconds